Go to homepage
CHF 0.00*
Filter
Close-up of a black cable tray beneath a light grey table top. The tray, made of powder-coated sheet steel, is visible from below and features a wide opening at the front and three cable openings at the rear for concealed routing. A black cable tray made of powder-coated sheet steel, photographed at an angle from the front and above. Long and U-shaped, with a wide opening at the front and three round cable openings at the rear for routing cables under a table.
Cable tray
A practical cable tray, in black. Towards the centre of the table, the cable tray has a wide opening to allow easier access to the cables.On the back, where the cables are routed from above under the table, it has 3 cable openings.The dimensions are:Length 130cm, width, 14cm, height 9cmFormed from 1mm sheet steel and powder-coated in black.We have this cable tray manufactured in Switzerland to our specifications.

CHF 120.00*
The underside of a black bar table frame with two castors at each end. At the front is a black, lockable swivel castor with a soft tread, which is gentle on the floor yet still allows for easy movement of the bar tables. Two black castors for bar tables, featuring a robust design, shown against a blue background. With a soft, floor-protecting tread and an M8 threaded pin for fitting. One castor has a locking lever to secure it in place for stability.
Castors for bar tables
The combination of two lockable castors and two non-lockable castors ensures that the table is both mobile and stable, depending on your needs.The soft tread on the Gross+Froelich “Stabil” castors is ideal for preventing scratches and wear on delicate floor coverings such as parquet or tiled floors.These castors are also well suited for carpets with a shorter pile.These castors have a soft tread, a diameter of 6 cm and an M8 threaded pin, suitable for our FlexTop poseur tables.

From CHF 10.00*
A MacBook Pro open on a dark desk displays a website about home office furniture. A white Desk2Device USB charger (USB-C/USB-A) and a black LINAK control unit are mounted underneath the tabletop. A cable connects the charger to the laptop. A white, rectangular Desk2Device USB charger lies next to a coiled black mains cable and a black mounting bracket. The charger has three ports on the side: two USB-C ports and one USB-A port for charging devices.
Desk2Device USB charger
USB charger The elegantly and sleekly designed LINAK Desk2Device USB charger offers two advantages:It draws its power directly from the LINAK control unit and does not detract from the stylish desk design.The device is powered via the CBD6S control unit, saving the user the hassle of an additional power cable that would otherwise create clutter.The charger has two USB Type-C ports, which intelligently share a maximum power output of 50 W depending on demand. It also features a USB Type-A port with a dedicated power output of 7.5 W.This allows users to charge virtually any USB device at the fastest possible speed.

CHF 85.00*
Dark grey EDGE acoustic table partition made of felt, with a rounded top edge, mounted on a black table top. A black bracket connects the partition to the table. The background features a blue colour gradient. Close-up view of a dark grey acoustic table partition made of felt, secured to the tabletop using a black clamp. Wing nut for securing; Allen key in the adjusting screw. Rear panel with a light grey rubber edge.
EDGE Table Back Panel / Soundproofing
Lintex Edge Acoustic Table PartitionThe table back panel, from the Swedish company Lintex, doesn’t just look good.It absorbs sound to an above-average degree, thereby reducing noise in the office.The acoustic table partition from Lintex is a product from a European manufacturer that specialises in the use of recycled materials.It features a dark grey felt fabric, Blazer Lite (LTH70), and a dark grey rubber edge.We offer the Edge table back panel in 3 lengths. 160cm - 180cm - 200cm

From CHF 460.00*
A bundle of black and one white electrical cables, organized with black Velcro straps; ensures tidy cable management. A blue-turquoise gradient in the background. A pair of black scissors with white handles lies next to a rolled-up roll of black Velcro tape. Two short pieces of Velcro tape, already cut to size, lie beside them, ready for cable management and organising cable bundles.
Velcro tape for cable management
That annoying cable clutter can be hidden away quite easily with a cable duct.But if you really want to keep things tidy, you’ll need a tool to connect the cable bundles together.This is often done using plastic cable ties. These usually have a sharp edge (risk of injury) and have to be replaced every time the cable harness is adjusted.Velcro straps provide the solution. They are ideal for this challenge.Easy to handle and reusable time and time again.We sell black Velcro tape on a roll.This black Velcro tape is approx. 5 millimetres wide and 3 metres long.Simply cut off about 10 cm with household scissors and wrap it around the cables.It does take about 5–10 minutes, but afterwards everything is neat and tidy :)

CHF 9.00*
This website uses cookies to ensure the best experience possible. More information...